Reese Single Bar WDH for Coleman

[whitestar505]

Have installed and used this product and have to say that I do like it. Very easy to install, adjust, and hitch up. The instructions say it will take 2-3 hours to install. Well maybe if you have done it before. It took me about five hours to install, of course I made the fine tuning in there. The two things I did not like was I had to drill a hole in the battery box for the lock-down pin so I could remove it or install it. The other thing was the single bar sits on the ground when disconnected. Nothing to hold it up of the ground to keep the dirt off the greased end piece. I did tie a rope around it to place it in after disconnection. Seems to do the trick. Installing it yourself will save you about 100-150$. :p

[tlhdoc]

Have you towed with it yet?  If so how do you like it?

[whitestar505]

I think it works very well. As I indicated before it takes a little time to adjust it when you first install it. After that it work great. In fact it seems that the more weight there is the better it works.  The other day when picking up the trailer from winterizing at the dealers I connected it up and forgot about the sway bar. Did not even realize that I did not install it until I was home and went to disconnect. I was surprised....

tlhdoc, how was your trip?

Have you towed with it yet?  If so how do you like it?