Text only | Text with Images

PopUp Times

General => Mr. Fix it => Topic started by: MtnCamper on Sep 28, 2003, 07:05 PM

Title: SantaFe Gray Water
Post by: MtnCamper on Sep 28, 2003, 07:05 PM
 Here s how I made my water containment. Click on the attachment below to see it. It s just a 3/4NPT to 5/8 hose nipple. Screw it in place of the little faucet, and push a short length of hose over it. Open the vent on the aquatainer and your set. Total cost $1.29, and 4 inches of hose!
Title: RE: SantaFe Gray Water
Post by: tlhdoc on Mar 18, 2003, 08:31 PM
 MtnCamper
 
QuoteORIGINAL:  MtnCamper
 
 Total cost $129, and 4 inches of hose!
 

 
 I don t think $129 is a good deal for what you have.  Are you sure about the price?[:D]
Title: RE: SantaFe Gray Water
Post by: Tim5055 on Mar 18, 2003, 09:31 PM
 tlhdoc
 
QuoteORIGINAL:  tlhdoc
 I don t think $129 is a good deal for what you have.  Are you sure about the price?[:D]
 

 
 I hope that s $1.29[:D]
Title: RE: SantaFe Gray Water
Post by: MtnCamper on Mar 18, 2003, 10:01 PM
 MtnCamperOK...OK..... One little decimal........ geesh!
Title: RE: SantaFe Gray Water
Post by: Trlrboy on Mar 20, 2003, 11:05 AM
 MtnCamperI have a similar set up for my Santa Fe but just built one with a vent in it by using a hose 2-way splitter.  I ll try that out in a couple of weeks and see if the sink drains quicker.
Title: RE: SantaFe Gray Water
Post by: jackgoesthepopup on Mar 23, 2003, 12:26 AM
 MtnCamperOn our palimino I did the same thing except instead of using a 90   i used a Tee with a piece of pipe going up that was higher then the top of the  sink so it would have a vent and it made a big didderance in draining.
Text only | Text with Images