PopUp Times

General => Mr. Fix it => Topic started by: MtnCamper on Sep 28, 2003, 07:05 PM

Title: Bunk End Fan/Light Repair
Post by: MtnCamper on Sep 28, 2003, 07:05 PM
 Anybody ever take one apart yet?
 
 Our s has been used about 3 times in a couple years, and pulled it out last week, wouldn t run. Power at the light (in camper), no fan. Or light. DEAD!
 
 I guess I ll take it apart today and see if there is a broken wire or what. I don t think there would be an fuses inside.
 
 Ideas?
 
Title: RE: Bunk End Fan/Light Repair
Post by: MtnCamper on Jun 04, 2003, 12:39 PM
 MtnCamperWell, a wire had pulled out, or vibrated out of the high precision junction block. So if yours quits, take it apart and look for a clear plastic junction block. The wires just push into it. If it happens again, I will do away with the block, and solder them together.