Well, we set out last weekend and we always to a taillight check and blinkers, our right taillight was out, checked the bulbs wasn't that...hmmm, ok well we gotta go :p
Our friends were following and said it flickered, anyone have this problem and if so how did you solve it?
Quote from: PITPOP27Well, we set out last weekend and we always to a taillight check and blinkers, our right taillight was out, checked the bulbs wasn't that...hmmm, ok well we gotta go :p
Our friends were following and said it flickered, anyone have this problem and if so how did you solve it?
Could be a bad ground, corroded socket or a faulty bulb. Those sockets aren't the greatest. They get corroded up pretty easily. It's a good idea to have a couple spare bulbs on hand. Stick a new one in and see if that doesn't solve it. A little sanding inside the socket and dielectric grease may solve the problem also.
Check the plug on the PU and see if it is clean. I had a problem and it was the plug on the PU.:)
Yup.. there is an intermitant connection going on.
It could be the filament in the bulb is loose getting ready to go all the way out.
As others have suggested a dirty socket, a loose wire to the socket at either end.
more than half of all trailer light prbs have to do with grounding that would be the first thing i would check
Ok will tell the ubs. It's not the bulb at all, placed it on the other socket it's fine. Thanks guys keep the ideas coming.
Quote from: lanermore than half of all trailer light prbs have to do with grounding that would be the first thing i would check
Hubby wantsd to know where the grounding is at?
Quote from: tlhdocCheck the plug on the PU and see if it is clean. I had a problem and it was the plug on the PU.:)
Hubby, "Which plug is he talking about?"
Quote from: PITPOP27Hubby, "Which plug is he talking about?"
I think that he is talking about the trailer plug where it goes into the TV. I don't think that's the problem. If it was, both tail lights would be flickering ;) .
It's most likely at the connection around the light. I'd start there.