Just purchased sorry not purchased traded an ATV for a 1996 coleman sun valley. went to plug in the trailer lights and did not work. They told me it might be a harness,but when I got it home and did some investigative work. I crawled under the trailer to check the wires, found that they were in the frame,but with a little tug the all came out about 10ft.looks like they were cut apart. Now is there anyway to find out where they connect to,like a main area in the rear of the camper or do I have to re-wire the whole thing. would appreciate any input
Welcome!
Sounds to me like your best route with the wiring is the path of least resistance.....in other words, feed the original harness back through the frame and connect it all back up as it should be.
Good luck!