Fleetwood Bayside Gray water adapter

[Bee60]

My friend just picked up a real nice 2007 Fleetwood Bayside last week. I'm having a problem figuring out how to hook up the gray water to a typical hose to drain the water in the ground when at a full hook up. It looks like there should be some sort of adapter there. The exterior threads measure 1 7/8" o.d.
this is too bid for a regular hose end to hook up to. Does any one know what I can use to hook my hose up with. I feel to think that the last owner forgot to leave an adapter for this connection. Or maybe I'm wrong. Can anyone cue me in with some info. Thanks! :U



2008 Fleetwood Arcadia
2008 Toyota Tundra
2008 Camping Trips 4 (Newbies just starting out)

[He Ruide]

Bee,  This is the adapter you need.  You should be able to get it from a Fleetwood dealer.  On the other hand you can get the parts from the plumbing section of a hardware store and make your own.

Hope this helps.

Ruide

[Bee60]

Ruide

I tried clicking on the link to see the adapter but it will not connect nor will the link for the parts. Can you try again. I would greatly appreciate it. Thanks for the quick response.




2008 Fleetwood Arcadia
2008 Toyota Tundra
2008 Camping Trips 4 (Newbie's just starting out)

[Shepherd]

If you want to make your own a 1 1/2" female threaded PVC joint will work.  Fashion the rest the way you want or you can follow the directions here and adapt it to your needs

http://www.title-3.com/Drain.htm

good luck

[He Ruide]

Bee,  I'm sorry you could  not connect but there was a point during the day when Smugmug must have been done.  I checked it and it is working again.

Anyway here is the comercial adapter.



Here are the parts for an adapter that you can make.
1. 1 1/2 inch threaded female PVC adapter
2. 1 1/2 inch PVC elbow
3. 1 1/2 inch with a 3/4 inch threaded female PVC adapter
4. 3/4 inch male to garden hose brass adapter

It parts look like this



here is the finish product



Ruide