News:

SMF - Just Installed!

Main Menu

RE: Coleman Valance Hooks

Started by griffsmom, Aug 07, 2003, 11:32 PM

Previous topic - Next topic

BaysideBruce

 Two of the valance hooks have broken in our Coleman.  They hold the valance up in the corners of the trailer.  I tried one of those little white stick-on hooks but they did not stay in place.  Any suggestions?

griffsmom

 BaysideBruceOur valance curtains are held in place by velcro.  You could try getting some sticky-backed velcro and sticking it on the camper roof then put the other side (either stick it or stitch it if you want it a bit more secure) on the curtain and that might do the trick! [:)]

Camping Coxes

 griffsmom
QuoteYou could try getting some sticky-backed velcro and sticking it on the camper roof then put the other side

 I tried using some sticky velcro on ours.  Coleman used a staple to hold the velcro on, and I didn t want to put holes in the celing when I added more velcro.  After putting on the velcro and coming back the next day to find it unvelcroed, I realized the heat in the trailer gets too hot for the self-stick on velcro.  I d try a hot glue gun to stick it on.  BTW, our trailer was popped up in the driveway and got that hot, so you can imagine how hot it probably gets when it s down.
 
 You could try putting the plastic hooks you mentioned, but I d again use a hot glue gun.