Dumber !!!!!

[birol]

Yesterday there was another storm approaching fast and I wanted to close the PU, fast ! There were tornado warnings issued and this thing was over us in no time. While trying to hurry, I extended a torn area on the canvas by 4 inches !!!!! Sigh ........

And to boot, I found out that someboedy undid the safety thingie on the winch and the roof was being held just by the two door frame and one oven cover holder wood. Obviously someone cranked it up and undid the locking mechanism I will from now on take the handle away and drill a safety lock mechanism hole on the winch.

Today I will raise it and patch up the canvas pronto !

If this keeps up Finally will go directly to junk yard without being camped even once

[angelsmom10]

Don't let it get the best of you.... you are better than that.

[birol]

Cleaned the kitchen, the kitchen table, started the dishwasher, off I go to my Finally to patch her up

[birol]

Man oh man, ever tried sewing canvas ? Pheeeew ! ANyways, the front bunk canvas torn in both corners, right side worse than the left side. I sewed the left side and patched it up with some spare canvas which came with FInally, looks patchy but strong !

Right side, I could olny sew it completely. I need more patch cement ! I am taking off now to get a gallon of it hehehhe Oh well close to i, so many torn pieces to be fixed.

Good thing the patch kit comes with that strong thread and the needle, I used pliers to sew at certain places.

[vjm1639]

hmmmmm....maybe after all this work and learning how to fix things on Finally, you can make your own new job.....you could open Birol's Camper Renewal shop!!:#

[angelsmom10]

He knows all the ins and outs on bringing across the board and not to purchase in Mass.
 
He could offer his services to finding and fixing a PU for those wanting one cheap!

[birol]

I could NOT go to get the canvas cement. Got into the windstar and it won't start Yesterday the gas light was on, I guess because of the way it is parked, whatever little amount is left in the tank is not enough to make it go the half mile to the gas station. So here I am stuck at home and no canvsa cement. I guess I will sew the other bunkend later on ...

[Starryart]

Hey we all have our little sputs and mysterious happenings but just forget it and go on fixin' your precious Finally! She will be worth it!
When/where is the rally? How much time do you have to work on her before you go?

[jpreiser]

I could NOT go to get the canvas cement. Got into the windstar and it won't start Yesterday the gas light was on, I guess because of the way it is parked, whatever little amount is left in the tank is not enough to make it go the half mile to the gas station. So here I am stuck at home and no canvsa cement. I guess I will sew the other bunkend later on ...

  1/2mile to the gas station... take the pooch for a walk and bring a gas can...

[birol]

DW came back from work and I got gas and went to look for the glue, noone sells them seperately This stuff outght to be sold somewhere at hardware stores !!!!! I can not keep paying 10 bucks for puny tubes !!!

[chip]

DW came back from work and I got gas and went to look for the glue, noone sells them seperately This stuff outght to be sold somewhere at hardware stores !!!!! I can not keep paying 10 bucks for puny tubes !!!

Birol--

I used contact cement on mine ('67 Starcraft Sunliner) when I was patching the canvas.  Apply the cement to the patch and to the surface around the rip/hole, let it dry and apply the patch.  Make sure that you get the patch in the right place the first time, 'cause it won't move once the two surfaces meet.  

Contact cement should be available at WalMart, or any building supply store.  In a quart (liter?) can.  Should be lots cheaper than "puny tubes."

Hope that helps.

[Firefyter-Emt]

Haa Haa.. I told you you were going to have to make a locking pin for that.. It was only a matter of time!

[birol]

Yeah Good thing no one got hurt eh At least I found out that those three pieces of wood can and will hold the roof up !

The holes are slatged to be drilled next week and a proper lock will take its rightful place. I am not leaving the crank on it anymore. Som idiot might also try to crank it up while it is latched up and cause more damage !  Some people are morons I guess !!!

Haa Haa.. I told you you were going to have to make a locking pin for that.. It was only a matter of time!