Coleman Lift Repair Manual - PDF

[jmcanzo]

I scaned this awhile back and posted it at PUX. I thought I would share it with everyone here also.
This is on closed Comcast account so I do not know how long it will be available.
 
****DIAL UP  USERS BEWARE*********
This is in a 14mb .PDF file so it will take some time to download to your pc, after the download is complete MAKE SURE you save it to your hard drive!
http://home.comcast.net/~jmcanzo1/liftman.pdf

[PhilipTiderman]

Thanks for scanning that lift manual! I just bought a 85 Coleman Sequioa and two of the lifts are shot. (both in back, of course) Do you know any possible way for one guy to get the roof up into lift servicing position by himself? Any suggestions at all? I already bought the cables, Nico crimps and even a Campbell Swage tool to do the crimping....(of which i was able to purchase 2 extra if you know anyone interested??) Any help or guidance at all will be greatly appreciated.

Thanks again for the manual - i'd be totally lost without it!

Phil T

[AlaTex]

Thanks for the info. Don't need just now, however saved it for future reference.  Perhaps someone would post electrical diagram for Coleman/Fleetwood.

[Mohnkern]

I'm very interested in two items you may have: The PDF of the lift system and the crimping tool. I just replaced a broken cable in my 88 Coleman Laramie, but cut the cable 6" too short (Aw, Nuggets!). I'll be purcahsing another cable this week and could really use the crimping tool next weekend.

Thanks for scanning that lift manual! I just bought a 85 Coleman Sequioa and two of the lifts are shot. (both in back, of course) Do you know any possible way for one guy to get the roof up into lift servicing position by himself? Any suggestions at all? I already bought the cables, Nico crimps and even a Campbell Swage tool to do the crimping....(of which i was able to purchase 2 extra if you know anyone interested??) Any help or guidance at all will be greatly appreciated.

Thanks again for the manual - i'd be totally lost without it!

Phil T

[bchbum68]

Need cable diagram and any helpful information on to replace.  Never done anything like this before.  I cannot afford to have dealer replace it.  I am a nursing student.

[AustinBoston]

This is on closed Comcast account so I do not know how long it will be available.

All gone!

If someone who did download it has a place to post it, I'd be grateful.

Austin

[tlhdoc]

If you call and email Fleetwood they will send you the manual.

[caseyjames]

do you still have that manual download, it is no longer avail on a closed account. I have an 1986 Coleman Tara, got half way up and poped and dropped. cables all seem tight though. When you crank it does not move anything. Thanks if you can help or offer any advice.

Thanks for scanning that lift manual! I just bought a 85 Coleman Sequioa and two of the lifts are shot. (both in back, of course) Do you know any possible way for one guy to get the roof up into lift servicing position by himself? Any suggestions at all? I already bought the cables, Nico crimps and even a Campbell Swage tool to do the crimping....(of which i was able to purchase 2 extra if you know anyone interested??) Any help or guidance at all will be greatly appreciated.

Thanks again for the manual - i'd be totally lost without it!

Phil T

[abbear]

ok guys - here it is:

http://homepage.mac.com/WebObjects/FileSharing.woa/wa/default?user=abbear&templatefn=FileSharing6.html&xmlfn=TKDocument.6.xml&sitefn=RootSite.xml&aff=consumer&cty=US&lang=en

The file is "liftman2"

It probably won't be there for long as I am about to lose the site.  Maybe tim or one of the others can set it up on their site.

Anyway, have at it for now.  And feel free to look at the other pictures if you want.

[leblar1]

Thanks for this info. It will come in handy

Andre

[jmcanzo]

I still have the manual available. Had to change the link as too much junk was coming on that email addy.
I fixed the link in the OP and it is also here
http://home.comcast.net/~jmcanzo1/liftman.pdf