News:

SMF - Just Installed!

Main Menu

Note to DNO

Started by waygard33, Aug 17, 2009, 04:19 PM

Previous topic - Next topic

waygard33

Hey DNO,
Question for you...Is there a way to embed a video in the post? Below is a link showing what I mean. Also, below is the code used to do that. The nice thing about embedding the videos in the actual post is the viewer doesn't have to leave the site to watch it.

Thanks for all your hard work,
Wayne in Oregon

Link to embeded video example:
http://www.dgrin.com/showthread.php?p=1186660#post1186660

Code that embeds the video on the other site but does not work here:
http://cdn.smugmug.com/ria/ShizVidz-2008120101.swf" />http://cdn.smugmug.com/ria/ShizVidz-2008120101.swf" flashVars="s=ZT0xJmk9NjIxNTU3NDI3Jms9NnRCM2kmYT05MjkwODEwX294bWVnJnU9d2F5Z2FyZDMz" width="640" height="356" type="application/x-shockwave-flash" allowFullScreen="true">

dno

I don't think so, for that I would need to allow HTML in the forum, this would allow spammers to post all kind of mean nasty stuff on the forum.
[USAflag]  [usa_az]

waygard33

OK. Thanks for the quick response.

Wayne in Oregon

waygard33

Dno,
On another note, I noticed that there's no way to get to a 2nd page under the 'Campfire' forum. I was gone for a week and wanted to catch up on some old posts and I noticed the problem.

Is it just me? or is something a little strange going on?

No big deal, just thought I'd let you know.

Wayne in Oregon

oreo57

Quote from: waygard33;209146Dno,
On another note, I noticed that there's no way to get to a 2nd page under the 'Campfire' forum. I was gone for a week and wanted to catch up on some old posts and I noticed the problem.
 
Is it just me? or is something a little strange going on?
 
No big deal, just thought I'd let you know.
 
Wayne in Oregon

Wayne, go to the bottom of the main("the campfire")page and use the display setting, 3rd box allows you to set the age of threads, Hope this helps.;)

waygard33

Quote from: oreo57;209155Wayne, go to the bottom of the main("the campfire")page and use the display setting, 3rd box allows you to set the age of threads, Hope this helps.;)

That got it Mike. Thank you.

Wayne in Oregon