RE: Outdoor Counter Top Details

[TheWallRocks]

 
In the latest issue of PUT (received today) on page 3 there is picture of a counter top installed around the hi-pressure stove of a Coleman Santa Fe.  What a great idea!  Anyone know how I can get some details of the installation?  I am assuming the folks (Todd Dennis) that submitted the article to PUT must be a member here somewhere.
 
 We ve been thinking about buying a table, but I like the counter top idea much better.
 
 

[TomToCamp]

 TheWallRocks
I went to Home Depot and bought  a preglued pine board 18   x  48   (I believe).
 I cut to length I wanted. Cut hole where wanted. Make hole for unit so you can put in machine screws/bolts (not screws that will pull out) I did not make mine overly long as not to interfer w/plugs/lights and AAR when up. I always make my projects to fit placement. I used same hardware to mount. Finished with exterior poly. All the screws in the old junk board had pulled out thats why I bolt everything. Size is 18   x 32  .
 Heres Picture.  
 http://community.webshots.com/photo/62302551/62305300YxgMvS

[Tim5055]

 TheWallRocks
You can check out mine also:
 
 [link=http://www.title-3.com/HPStove.htm]Replacing the Outside Stove Countertop[/link]