Bent end and door won't shut

[bigyooper]

I had the corner of my starcraft bend this year and now the door won't shut properly. is there a fix for this? did something break that needs to be welded?

[wavery]

I had the corner of my starcraft bend this year and now the door won't shut properly. is there a fix for this? did something break that needs to be welded?

WELCOME TO PUT

Not sure what, "I had the corner of my starcraft bend this year" means but if it was bent bad enough to tweak the frame, you may have a real problem.

These PU frames are not real substantial due to weight restrictions. You can tweak the frame by merely jacking it up (improperly) to change a flat tire. If you do, often times, the door not fitting is the first indication of the problem.

[bigyooper]

we had 2 people crawl into the end bed before the jacks were put under the frame. is there any way to fix this issue?

[Recumbentman]

Are you sure the frame is bent ? usually on this kind of SPUT the bed rails get bent and those are easily enough to fix. does the bed slide in and out OK. having a hard time visualizing this. Is there any way of posting a picture ? can you tell us what year and model PU you have. Is the door into the PU at the rear ?
The more info you can supply, the better we can help you.