indoor/outdoor stove bracket

[BIGAPOTTER]

I am wondering if anyone can describe what this looks like or tell me where i might be able to find a replacement. I see my quick connect on the exterior and where the stove slides onto the grooved holder.

I have a 96 coleman taos i bought used. I was given a bracket but i can't imagine how it could be the right one. There is no way for it to hook on and support the stove on the pu exterior.

Please advise...Thank you for any assistance.

[austinado16]

Isn't there an extruded aluminum channel on the side of the trailer and a matching channel on the upper back edge of the stove?  Those just lock together and then the stove's cabinet either rests against the trailer body, or there is a foot that goes from the bottom of the stove front, rearward into a cleat on the side of the trailer....sort of a traingle brace.

If you look at the photos of one for sale on ebay, you'll probably find some views of this.

[curryp]

The bracket I have to hold the burners outside is kinda V shaped. I say kinda because the bottom is about 4-5" long and flat and on each top part is a small tab.
The flat part snaps into a small clip on the wall of the camper below the top bracket where you put the stove. On the underside of the stove should be two clips for the tab to go on. This is the same way the shelf goes on the outside of the camper.

Not sure if what I describe helps you or not, but thought I would try. Good luck.