outside shower repair

[campincrew]

I own an '02 Coleman Mesa and my outside shower leaks.  A couple of years back, my dog had an encounter with the hose and broke the fitting that pops through the housing and attaches to the hose assembly.  I have replaced the fitting and the hose, but it still leaks.  How can I remove the ABS housing and make some good permanent connections?  It seems that the screws only spin when I attempt to remove them.  Can you help?

[Steve-o-bud]

I own an '02 Coleman Mesa and my outside shower leaks. A couple of years back, my dog had an encounter with the hose and broke the fitting that pops through the housing and attaches to the hose assembly. I have replaced the fitting and the hose, but it still leaks. How can I remove the ABS housing and make some good permanent connections? It seems that the screws only spin when I attempt to remove them. Can you help?

Hi. Last summer we were camping with our friends down in San Diego, and when he hooked up to City Water (using a pressure regulator of course), he discovered that the plastic water valve for the cold water had broken off, and was spraying water all over the place. Not wanting to do without running water all weekend, we decided to fix it.
 
You can get a replacement shower (valve, shower head, etc.) from any RV supply house. Replace the whole works, because it is pretty inexpensive. The valve assembly is held on by two plastic nuts from backside. Remove the nuts, disconnect the water lines, and the unit will pull out from front. Reverse the process for reintstallation.