News:

SMF - Just Installed!

Main Menu

Sink Pump, etc.

Started by Looneytoon, Jul 18, 2006, 04:34 PM

Previous topic - Next topic

Looneytoon

Hi All,

We found a PU and are excited about the whole thing!!

Got it home last night and got up this morning and backed into the drive.  I did not do too bad backing in, either.....all by myself:-)

OK, here are a couple of questions:

First, when the sink is raised in the setup position, the feeder hose from the fresh water tank folds over just under the sink and prevents the water from flowing.  We have moved the hose around and even had the wife make sure the hose would flow free.  At best, we get just a few trickles.  It works fine when hooked directly to a water supply.

1.  Is there a certain type of hosing you have used to replace the factory clear rubber?  Something that would flex rather than crimp??

2.  The hand pump is certainly a tiny, cute little thing.  But I bet there is a replacement pump that perform much better.  Anyone got a good to great recommendation on a replacement pump?


Boy, I could sure use your expereinced help on these items, and thanks!!!

Jack

WingNut

I have a coleman pu that had the same prob.  I went to Wal Mart and bought reinforced garden hose and put the proper ends on it.  I also replaced my hand pump with a 12 volt water pump from our local camping store. If you go to a camper supply store, they can usually find what you need pretty quick, and they really aren't too expensive.  I gave $45.