News:

SMF - Just Installed!

Main Menu

TV - PUP Plug Interface?

Started by scottab96, May 27, 2008, 07:38 AM

Previous topic - Next topic

scottab96

Went out for the first time this year with the family and had a GREAT time.  Weather was perfect and found some new friends....
 
One of the many questions I have is..... once I first hooked up and did my lighting check with the DW I had no break lights or turn signals on the trailer.  Once I went back to the plug and wiggled it around a little it started to work. Is there some sort of spray or treatment that I can use on the plug and recepticle on the TV that will help keep this connection clean and working well?

flyfisherman

Quote from: scottab96Went out for the first time this year with the family and had a GREAT time.  Weather was perfect and found some new friends....
 
One of the many questions I have is..... once I first hooked up and did my lighting check with the DW I had no break lights or turn signals on the trailer.  Once I went back to the plug and wiggled it around a little it started to work. Is there some sort of spray or treatment that I can use on the plug and recepticle on the TV that will help keep this connection clean and working well?



An electrical contact lubricant is probably what you need ~


http://www.sanchem.com/aSpecialE.html



Fly

austinado16

WD-40 into both plugs.  Plug and unplug a few times, and then follow up with dielectric grease.