PU won't go down

[David Roder]

So I did my first trip this weekend and LOVED the PU!!!  When I got home I popped it up half way, just enough for me to crawl in and pull out some stuff.  Then when I was cranking it down, the back right got stuck about 4 feet up and won't go down! :mad: The other three corners are working just fine but this one get stuck and that's that.  Anyone deal with this or know what to do :confused:   Thanks

[tlhdoc]

What type of camper/lift system does your trailer have?

[David Roder]

It's a 2004 Forest River Flagstaff 228 M.A.C.  and I'm not sure what type of lift system it has.

[wynot]

It's a 2004 Forest River Flagstaff 228 M.A.C. and I'm not sure what type of lift system it has.

You might have had a cable slip off, or got tenting caught in the strut.  Have you popped up the camper fully, and retried popping it down?  I can honestly tell you, it does NOT pay to only pop partially - it takes longer to get things put away.

[hoppy]

Hello David,

   Not familiar with your PU, but when my PU would bind up, I'd make certain that it is on level ground (stabilizers in the up position ) crank the roof all the way up, and then back down again.

   Hope this works for you.

   Hoppy