BAL Leveler

[camperjohn]

I bought a BAL Leveler a while ago (impulsively) and never ever used it.  This is the single axle wheel leveler.  

Anyone interested in buying it?  It is new.

JC

[SpeakEasy]

I bought a BAL Leveler a while ago (impulsively) and never ever used it.  This is the single axle wheel leveler.  

Anyone interested in buying it?  It is new.

JC

What's your price?

[wavery]

What's your price?

I'll open the bidding at  $6.77  

[Toby]

I'll open the bidding at  $6.77  

Sorry wayne, I'll go to 6.88. :U

[wavery]

Sorry wayne, I'll go to 6.88. :U

This is getting intense..........I'll go $7.88 :-()

[oreo57]

OK I'll bite, $7.89......These things are way over talked about...take it a run !!

[SheBantam]

I've watched people with them and I just do not get it...call me old fashioned but wood is a WHOLE LOT easier, ESPECIALLY with one axile, the Bantam is a little more challenging with wood (double axiles), but I do it all the time, if I cannot find a level spot, and I am one of those people, if it is close, I am fine.  Close is good, especially with AC and that water run off.

[HersheyGirl]

I love my BAL...once you know how to use it, it is much easier than wood or linx.  The BAL holds the camper much more securely than wood...much less movement in the camper.  I will never go back to wood.

[mkcom1]

Okay I,ll bite at 11.33   ken

[SheBantam]

I love my BAL...once you know how to use it, it is much easier than wood or linx.  The BAL holds the camper much more securely than wood...much less movement in the camper.  I will never go back to wood.

That is what I have a floor jack for (To stablize the camper, NOT to lift it once it is level and it is sooooooo easy to use)...Linx levelers? I gave mine way a year or two ago...I could not get the hang of them either.
I carry several different sized boards and can judge from the level how many I need to back onto.  Like I said, the Bantam (which I cannot use a BAL even if I wanted to) is the one that is harder to back (or in some cases pull) onto wood. Remember the CabinA is 15'from end to end with only an 11' box.

But to each their own. Good luck on the bidding guys.

[wavery]

That is what I have a floor jack for (To stablize the camper, NOT to lift it once it is level and it is sooooooo easy to use)...Linx levelers? I gave mine way a year or two ago...I could not get the hang of them either.I carry several different sized boards and can judge from the level how many I need to back onto.  Like I said, the Bantam (which I cannot use a BAL even if I wanted to) is the one that is harder to back (or in some cases pull) onto wood. Remember the CabinA is 15'from end to end with only an 11' box.

But to each their own. Good luck on the bidding guys.

What's to "Get the hang of" :confused:

You slide it under the low tire then turn the screw (clockwise) until the camper is level.... :yikes:

I will admit, it is a lot easier to use with a drill motor. If you have a long ways to lift, the hand ratcheting tool can get a little tiring  :morning: .

[DiW]

I will admit, it is a lot easier to use with a drill motor. If you have a long ways to lift, the hand ratcheting tool can get a little tiring  :morning: .

haha, ask Tracy about that :banghead:

[wavery]

OK, camperjohn.....you've got a bid of $11.33......bidding is getting serious here.

What is the S&H cost on this thing?? :sombraro:

[tlhdoc]

haha, ask Tracy about that :banghead:

Di it was your job to do the cranking:D

[tlhdoc]

What is the S&H cost on this thing?? :sombraro:

$65.00 for the shipping.